Service walkway inside the plant with piping, filters and tanks behind an open door
Robotized Parts Washer
ITF Robotool Robotized Washer
Parts-in-wrist high pressure deburring washer for parts up to 16 kg, with 1 or 2 robots
The ITF Robotool robotized washer cleans, degreases and deburrs parts up to 16 kg with high pressure water jets, then rinses and dries them in one compact plant, with the parts held in the wrist of 1 or 2 robots.
Manufactured byITF
Up to 16 kgParts handled by the robot
1 or 2Robots per plant
IP67Anthropomorphic robot rating
VacuumDrying outside the robot chamber
Overview
Small parts deburred in the robot's wrist
The ITF Robotool is a parts-in-wrist robotized washer for high pressure deburring of parts up to 16 kg. It cleans and degreases the part surfaces and removes contaminants from blind and through holes, pockets, anchors and interior and exterior surfaces, with washing, high pressure flushing, rinsing and drying in a single plant.
An anthropomorphic IP67 robot moves each part into and out of the treatment lances. The working chambers are stacked vertically to keep the footprint compact, and a step-by-step linear conveyor driven by a gearmotor carries the parts from station to station. Drying is done by a vacuum process outside the robot process chamber.
Loading and unloading are done by an operator or by an automation system, at two adjacent but separate front positions that can be reconfigured. The plant is available with one or two robots.
Applications
What the Robotool cleans
Parts of complex shape are cleaned without reassembling the washing jets, because the robot brings each part to the lances.
Gripper holding two round metal parts inside the stainless steel washing chamber
Fixture with two round machined parts on the step-by-step conveyor of the washer
Blind and through holes
Removing contaminants from blind and through holes with high pressure water jets.
Pockets and anchors
Flushing pockets and anchors where dirt and burrs remain after machining.
Interior and exterior surfaces
Cleaning and degreasing the inner and outer surfaces of each part.
Complex-shaped parts
Washing parts of complex shape without reassembling the washing jets.
Features
Machine features
- Anthropomorphic IP67 robot that moves the parts into and out of the treatment lances
- Available with 1 robot or 2 robots
- Vertically stacked working chambers for a compact footprint
- Step-by-step linear conveyor driven by a gearmotor
- Two adjacent, separate front loading positions that can be reconfigured
- Vacuum drying outside the robot process chamber
Benefits
What it brings to production
Washing, high pressure flushing, rinsing and drying in a single plant
Complex shapes cleaned without reassembling the washing jets
Compact footprint thanks to the vertical chamber layout
Loading by an operator or by an automation system
Need to deburr and clean small precision parts?
Share your parts, contaminants and cycle time, and our Machinery team will help you configure the right ITF Robotool robotized washer.
Other Products in Parts Washing & Deburring Systems
Explore other products available within the same product category and open each page for complete technical details.
Rösler Industrial Cleaning Systems
Aqueous continuous and drum cleaning systems that remove oils, chips and release agents before or after finishing.
Rösler Washing and Drying Systems
WTA systems that finish, clean and dry small or mass-produced parts in one compact unit, without media.
ITF RobotAutoFlex High Pressure Deburring
Robotic cell combining brushing, tool and high pressure water jet deburring for up to 6 robots.
ITF Gladiator Robotized Washer
Robotized washer for parts up to 210 kg: high pressure deburring, rinsing and vacuum drying in one plant.
ITF Robotflex High Pressure Deburring
Floating pallet plant with 2 or 4 robots for high pressure deburring, washing and drying of machined parts.
ITF Multitransfer Ultrasonic Cleaning Line
Automatic ultrasonic cleaning line that moves multiple baskets at once through the tanks, under PLC control.
ITF Robotronic Ultrasonic Cleaning Line
Automatic ultrasonic cleaning line with a two-axis gantry that handles each piece-holder basket through the tanks.
ITF Manual and Semi-Automatic Ultrasonic Tanks
Ultrasonic immersion tanks, manual or semi-automatic, for washing parts of many shapes with water-based detergents.
ITF Rotary Drum Parts Washer
Screw conveyor drum washer with pre-wash, wash, rinse and optional passivation, and Depure-Rinse savings.
ITF Positioned Jets Rotary Table Parts Washer
Rotary table washer with rotating satellites and positioned jets, retooled in about 15 minutes, for machined parts.
ITF Rotating Satellites Parts Washer
Step-by-step positioned washer with rotating satellites and transfer chain, retooled in about 15 minutes.
ITF LT-PP / LT-PL Index Conveyor Parts Washer
Index conveyor washers with LT-PP loop or LT-PL floating pallets for cleaning parts of different shapes.
ITF Overhead Conveyor Tunnel Washer
Spray tunnel washer for parts hanging on an overhead conveyor, running continuously or step by step.
ITF Belt Conveyor Tunnel Washer
Spray tunnel washer with a stainless steel belt for metal parts, running continuously or step by step.