ULTRAFLEX - MANUAL
Manual ultrasonic immersion tank. Parts are placed directly in the tub or in a basket lowered into it.
Ultrasonic Immersion Tanks
ITF Manual and Semi-Automatic Ultrasonic Tanks
ULTRAFLEX manual and semi-automatic ultrasonic immersion tanks
ITF manual and semi-automatic ultrasonic tanks wash parts of many types and shapes by immersion, using water-based detergents and ultrasonic transducers that automatically adjust cavitation across the bath.
Manufactured byITF
FlangedOr immersible transducers
Water-basedDetergents with ultrasound
PneumaticOptional cylinder for part or basket
2 versionsManual and semi-automatic
Overview
Cavitation that reaches every corner of the part
The ITF ultrasonic immersion tank is suitable for washing parts of various types and shapes. Ultrasonic transducers are installed in the tank and can be flanged or immersible, as the customer chooses. The ultrasound system uses preset data and the transducer to adjust cavitation automatically across the whole wash bath.
The cavitation bubbles created by the ultrasonic waves reach the surface and the hidden corners of the part, where they collapse and loosen the dirt. The process is water based, with water-based detergents and ultrasound.
Parts go directly into the tank or into a basket placed in it. For heavier loads or a higher level of automation, a pneumatic cylinder can insert and remove the part or the basket. Loosened dirt either settles on the tank bottom and is drained through a large-diameter cleaning valve, or stays suspended and is skimmed off by a ramp that keeps the surface clean, which can be connected to a filter system.
Models
Two tank versions
ULTRAFLEX - SEMI-AUTOMATIC
Semi-automatic ultrasonic immersion tank for heavier loads or a higher level of automation in part and basket handling.
Applications
What the tanks clean
The tanks wash parts of many types and shapes with water-based detergents and ultrasound.
Parts of various shapes
Washing parts of many types and shapes by immersion in the ultrasonic bath.
Hidden corners
Cavitation bubbles loosen dirt from the surface and hidden corners of the part.
Parts in baskets
Washing parts placed in a basket that is lowered into the tank.
Heavier loads
A pneumatic cylinder inserts and removes heavier parts or baskets.
Features
Tank features
- Flanged or immersible ultrasonic transducers, as the customer chooses
- Automatic cavitation adjustment across the whole wash bath
- Water-based process with water-based detergents
- Optional pneumatic cylinder to insert and remove the part or basket
- Large-diameter cleaning valve to drain settled dirt
- Skimming ramp that keeps the bath surface clean, with optional filter connection
Benefits
What it brings to the workshop
Dirt loosened from hidden corners, not only from the surface
Even cavitation across the whole bath
Water-based cleaning
Manual or semi-automatic handling to suit the load
Looking for an ultrasonic cleaning tank?
Share your parts, their size and the dirt to remove, and our Machinery team will help you choose the right ITF manual or semi-automatic ultrasonic tank.
Other Products in Parts Washing & Deburring Systems
Explore other products available within the same product category and open each page for complete technical details.
Rösler Industrial Cleaning Systems
Aqueous continuous and drum cleaning systems that remove oils, chips and release agents before or after finishing.
Rösler Washing and Drying Systems
WTA systems that finish, clean and dry small or mass-produced parts in one compact unit, without media.
ITF RobotAutoFlex High Pressure Deburring
Robotic cell combining brushing, tool and high pressure water jet deburring for up to 6 robots.
ITF Gladiator Robotized Washer
Robotized washer for parts up to 210 kg: high pressure deburring, rinsing and vacuum drying in one plant.
ITF Robotool Robotized Washer
Robotized washer for parts up to 16 kg: high pressure deburring, rinsing and vacuum drying in a compact plant.
ITF Robotflex High Pressure Deburring
Floating pallet plant with 2 or 4 robots for high pressure deburring, washing and drying of machined parts.
ITF Multitransfer Ultrasonic Cleaning Line
Automatic ultrasonic cleaning line that moves multiple baskets at once through the tanks, under PLC control.
ITF Robotronic Ultrasonic Cleaning Line
Automatic ultrasonic cleaning line with a two-axis gantry that handles each piece-holder basket through the tanks.
ITF Rotary Drum Parts Washer
Screw conveyor drum washer with pre-wash, wash, rinse and optional passivation, and Depure-Rinse savings.
ITF Positioned Jets Rotary Table Parts Washer
Rotary table washer with rotating satellites and positioned jets, retooled in about 15 minutes, for machined parts.
ITF Rotating Satellites Parts Washer
Step-by-step positioned washer with rotating satellites and transfer chain, retooled in about 15 minutes.
ITF LT-PP / LT-PL Index Conveyor Parts Washer
Index conveyor washers with LT-PP loop or LT-PL floating pallets for cleaning parts of different shapes.
ITF Overhead Conveyor Tunnel Washer
Spray tunnel washer for parts hanging on an overhead conveyor, running continuously or step by step.
ITF Belt Conveyor Tunnel Washer
Spray tunnel washer with a stainless steel belt for metal parts, running continuously or step by step.