Close-up of the blue TE-400 head with an indexable milling cutter mounted in the spindle
Horizontal Machining Center
Innse-Berardi IBPMax T
Horizontal profiler for titanium with TE-400 head
Innse-Berardi IBPMax T is a horizontal machining center for titanium and other hard-to-machine materials. A patented kinematic layout and the TE-400 head keep material removal steady across the full working volume.
Manufactured byInnse-Berardi
6300 mmMax. X-axis travel
3000 mmMax. Y-axis travel
120 kWMax. TE-400 head power (S1)
1400 NmMax. TE-400 head torque (S1)
4 m/s²X, Y, Z axes acceleration
Overview
Built for titanium and hard-to-machine alloys
IBPMax T is the Innse-Berardi horizontal machining center for titanium and other hard-to-machine materials. It aims at high static and dynamic positioning accuracy at high speeds and accelerations, with consistent material removal across the working area.
In the patented kinematic layout the X axis is guided at both the base and the top of the rear support structure. It works with an independent Z axis and a thermo-symmetrical Y axis without a ram, which reduces deflection on all axes. Hydrostatic Z-axis guides damp vibration, and multiple optical scales and dual geared motor sets give high torque and power.
X travel is 4300, 5300 or 6300 mm and Y travel 2200 to 3000 mm. Z travel is 1000 to 1500 mm for the horizontal profiler and 2000 to 3000 mm with a rototraversing table. Axes feed up to 30000 mm/min and accelerate up to 4 m/s².
The TE-400 head uses a high-torque electrospindle with HSK-A-100 taper: 713, 1000 or 1400 Nm (S1), 86 to 120 kW and 8000, 6000 or 4500 rpm. Its C and A axes give 9000 to 17000 Nm of machining torque.
Applications
What IBPMax T machines
The machine is designed for heavy material removal where stability and accuracy matter.
Titanium parts
Consistent material removal rates on titanium across the full working volume.
Hard-to-machine materials
High-torque cutting with reduced vibration and low tool wear on difficult alloys.
Heavy material removal
Up to 120 kW and 1400 Nm at the TE-400 head for heavy cuts that need stability.
Features
Machine features
- Patented X-axis guided at base and top of the rear support
- Independent Z axis and thermo-symmetrical Y axis
- Ramless structure that reduces deflection on all axes
- Hydrostatic Z-axis guides for vibration damping
- Multiple optical scales and dual geared motor sets
- TE-400 head with high-torque electrospindle and HSK-A-100 taper
- Optional rototraversing table with 2000 to 3000 mm Z travel
Benefits
What it brings to production
Steady material removal across the working volume
Positioning accuracy kept at high speeds and accelerations
Less vibration and tool wear on hard materials
Machining titanium or other hard alloys?
Tell us about your parts and materials, and our Machinery team will help you configure the IBPMax T and its TE-400 head.
Other Products in Milling & Boring Machines
Explore other products available within the same product category and open each page for complete technical details.
Innse-Berardi Atlas Hydro
Hydrostatic portal milling center for large parts, up to 100 kW and 9000 Nm, in P, P-W, G and G-W versions.
Innse-Berardi Atlas Vision
High-speed vertical milling centers with linear guideways, up to 6000 rpm, in planomiller and gantry versions.
Innse-Berardi Aries Hydro
Moving-column horizontal milling and boring machines on hydrostatic guideways, up to 150 kW and 32000 Nm.
Innse-Berardi Aries Vision
High-speed moving-column milling and boring centers with box-in-box design, FR and FRAL versions up to 60 kW.
Innse-Berardi IBPMax S
Horizontal machining center for aluminium alloys, up to 30000 rpm and 70000 mm/min, with TABM-E head.
Innse-Berardi FCR Generator Rotor Slotter Milling Machine
Dedicated machine for milling generator rotor slots, with two heads, 1200 mm disk cutters and automatic indexing.
Innse-Berardi FCT Turbine Rotor Slotter Milling Machine
Dedicated machine for fir-tree slots on turbine rotors, with two synchronized units and automatic indexing.
Innse-Berardi FMM Multi-Spindle Horizontal Drilling Machine
Multi-spindle deep hole drilling machine for tube sheets up to 1000 mm thick, with 2, 3 or 5 drilling units.
Innse-Berardi Atlas Hydro S
Portal milling machines for rails, switches and frogs, in SP planomiller and SG gantry versions up to 25 m.
PARPAS AERO
5-axis gantry machining centre for large parts in hard materials, with travels up to 30,000 mm.
PARPAS XS
High-speed 5-axis gantry machining centre with TTM technology and thermal control of the structures.
PARPAS SPEEDLINER
Full linear motor 5-axis gantry machining centre for high-speed roughing and finishing, up to 30,000 mm.
PARPAS DIAMOND
5-axis gantry machining centres with linear motors and monobloc structure: DIAMOND 30, 15 and 10.
PARPAS INVAR
Travelling column boring centre for accuracy under temperature change, travels up to 30,000 mm.
PARPAS ML
Travelling column milling-boring machines ML 200 and ML 120 for heavy machining, up to 30,000 mm.
O.M.V. DINAMIKA
High-speed moving column machining centre with box-in-box structure and travels up to 20,500 mm.
O.M.V. FORMULA
Moving column machining centre with active thermo-stabilization and TTM technology, up to 20,500 mm.
O.M.V. ELECTRA
High-accuracy moving column machining centre with box-in-box structure for 3- and 5-axis work.
O.M.V. SHARK
Fixed table, moving column machining centres SHARK and SHARK ONE with box-in-box structure.
O.M.V. MANTA
Compact fixed table, moving column machining centre for light metal parts, moulds, dies and fixtures.