Samples
- Cylinder
- ø50 x 40 mm
- Pin
- up to ø8 mm or 8 x 8 mm, length approx. 20 mm
- Measurable wear length
- approx. 2 mm
- Wear limit
- 2.5 mm total, up to 1.5 mm on the cylinder
Friction & Wear Testing
Hegewald & Peschke Friction Test Stand
Friction and wear testing of metallic pin-cylinder pairs under climate influence
The Friction Test Stand from Hegewald & Peschke examines the friction and wear behaviour of metallic pin-cylinder pairs inside a climate-controllable chamber, with adjustable temperature, humidity, friction speed and normal force.
Manufactured byHegewald & Peschke
2000 NNormal force
1000 NFriction force
10 m/sFriction speed
2.5 mmTotal wear limit
approx. 400 kgWeight
Overview
Pin-cylinder pairs in a climate-controlled chamber
The friction test stand is used to examine metallic cylinder-pin pairs under climate influence in the range of sparse wear. The test area sits inside a climate-controllable chamber, and temperature, humidity, friction speed and normal force can be adjusted during testing.
The test can be watched through a window in the chamber door. The machine is delivered completely assembled, the sample holder can be adapted to customer requirements, and the base system can be extended with accessories such as external climate control units and protective devices.
Technical data
Samples, limits and dimensions
Parameter limits
- Normal force
- 2000 N
- Friction force
- 1000 N
- Friction speed
- 10 m/s
- Rotation
- Reversible when stopped
Machine
- Dimensions W x D x H
- 1365 x 720 x 1500 mm (without external climate chamber)
- Weight
- approx. 400 kg
- Data acquisition
- PC-based
- Option
- Climate chamber sized to the required climate conditions
Applications
Where the friction test stand is used
Pin-cylinder friction testing
Friction testing of metallic pin and cylinder contact pairs.
Climate-influenced tribology
Friction and wear tests under set temperature and humidity.
Long-term and accelerated wear
Long-term wear studies and accelerated tests in the sparse wear range.
Features
Chamber, load and control
Test chamber
- Heat-insulated, climate-controllable test space.
- Observation window in the door.
- Climate control possible before test start.
Load and drive
- Drive unit with servo motor on a stable base plate.
- Spring-supported test space on the table.
- Adjustable load unit with weights; optional electric load adjustment during the test.
Test control
- Accelerated and long-term tests.
- Time-dependent shutdown or shutdown when measured value limits are exceeded.
- Measured value acquisition by PC with configurable data recording.
Benefits
Why use this test stand
Realistic climate. Friction and wear testing under set temperature and humidity conditions.
Long-term studies. Suited to long-term wear studies on pin-cylinder pairs.
Flexible parameters. Adjustable force, speed and climate allow a flexible test setup.
Documented results. PC-based data acquisition supports monitoring and documentation.
Adaptable holders. Sample holders and accessories can be adapted to special requirements.
Need support with this friction test stand?
Share your material pairs, sample sizes, loads, speeds and climate conditions, and our Performance Engineering team will support you with the suitable product information.
Other Products in Special Testing
Explore other products available within the same product category and open each page for complete technical details.
Hegewald & Peschke 1D Digital Length Measuring Devices
Digital length measuring devices for pipes, profiles, rods and long workpieces, in Light and Heavy models.
Hegewald & Peschke Calmar Testing Systems
Modular furniture and component test rigs with freely positioned pneumatic and electric test axes.
Hegewald & Peschke Creep Testing Devices
Weight-loaded creep devices for long-term compression, bending and tensile tests on cardboard and textiles.
Hegewald & Peschke PSd Pendulum Impact Testers
PSd 50, PSd 300/450 and PSd 750 pendulum impact testers for plastics and metals, with instrumented testing.
Hegewald & Peschke Bending Fatigue Testing Machine for Wire Specimens
180° reverse bending tests on wires of 0.3 to 10.0 mm, with up to 3 specimens tested at a time.
Hegewald & Peschke Rotational Impact Tester
Highly dynamic tensile tests on composites, textiles and joints at up to 14 m/s and 350 s⁻¹.
Hegewald & Peschke Stone Impact Tester
Enclosed test stand firing 4-5 mm projectiles at up to 140 km/h on coatings, parts and textiles.
Hegewald & Peschke Torsion Testing Machines
Tabletop, wire and high-capacity torsion testers from 200 Nm to 5000 Nm for static and cyclic tests.