S 2000
Front-loading beam saw, 110 mm cutting depth, 400 mm main blade with 15 HP motor and brushless pusher drive.
Beam Panel Saws
STETON Beam Panel Saws
S 2000, S 2000 T, BPS 95 and BPS 95 T
STETON beam panel saws size panels at 3700 or 4500 mm cutting length. The S 2000 cuts up to 110 mm deep and the BPS 95 up to 80 mm, and the T versions load from the rear on a lifting table.
Manufactured bySTETON
3700/4500 mmCutting length options
110 mmMax. cutting depth (S 2000)
80 mmDepth of cut (BPS 95)
15 HPMain blade motor
5 grippersHold panels up to the last cut
Overview
Panel sizing with front or rear loading
The S 2000 beam saws combine solid, accurate mechanics with electronic control. The pusher runs on a D.C. brushless motor, cutting length and pusher stroke are 3700 or 4500 mm, and the maximum cutting depth is 110 mm. The 400 mm main blade has a 15 HP motor and the 180 mm scoring blade a 3 HP motor; blade height, scorer height and alignment are set by the electronic control.
The S 2000 T is loaded from the rear onto the lifting table, or preloaded from the side on a roller conveyor. With special pincers on the pusher it also cuts thin panels such as hardboard and plywood.
The BPS 95 cuts 3700 or 4500 mm long and 80 mm deep with a 350 mm main blade on a 15 HP (11 kW) motor and a 180 mm scoring blade. Blade feed speed is 1 to 60 m/min, and the inverter-driven pusher reads its position on a magnetic strip. The BPS 95 T adds a scissor lift for panels up to 4500 × 2200 mm and stacks up to 560 mm high.
On all models five pincers hold the panels up to the last cut in the pressure beam area.
Models
Beam saw models
S 2000 T
Rear loading onto the lifting table or side preloading on a roller conveyor; cuts thin panels with special pincers.
BPS 95 T
Rear-loading version with scissor lift for panels up to 4500 × 2200 mm and stacks up to 560 mm high.
BPS 95
Front-loading beam saw with 80 mm depth of cut, 1–60 m/min blade feed and inverter-driven pusher.
Applications
Panel cutting jobs
Options extend the saws from straight sizing to special panels and cuts.
Panel sizing
Straight cuts on 3700 or 4500 mm panels, with five pincers holding the panel to the last cut.
Stack cutting from the rear
T versions take panel stacks on a lifting table; the BPS 95 T lift takes stacks up to 560 mm.
Postforming panels
An optional scoring cycle with a 250 mm blade scores postformed edges before the main cut.
Grooves and angled cuts
On the BPS 95, electronic blade height adjustment cuts slots, and an attachment cuts angles with an angle display.
Thin and coated panels
Special pincers handle thin hardboard and plywood, and comb pincers hold panels with protruding coating.
Features
Saw features
- Cutting length and pusher stroke of 3700 or 4500 mm
- Main blade motor 15 HP, scoring blade 180 mm
- Five double-acting pneumatic grippers in the pressure beam area
- Brushless pusher drive (S 2000) or inverter pusher with magnetic strip (BPS 95)
- Electronic setting of blade height, scorer height and alignment (S 2000)
- Main blade and scorer moving vertically on hardened steel bars with ball bearings (S 2000)
- Lifting table on four steel screws with bronze nuts (BPS 95 T)
- Options: 20 HP blade motor, blade cooling atomizer, extra gripper, feed limiter by motor load
Benefits
What it brings to panel cutting
Front or rear loading to match the panel flow
Panels held firmly up to the last cut
Slots, angles and postformed panels on the same saw with options
Two cutting lengths to fit standard panel sizes
Sizing panels in volume?
Share your panel sizes, materials and daily volume, and our Machinery team will help you choose the right STETON beam panel saw.
Other Products in Joinery Machines
Explore other products available within the same product category and open each page for complete technical details.
COSMEC SM 300 / SM 350 / SM 350 LM
Single-arbor multirip saws that cut timber into strips, with 300 or 350 mm feed belts and up to 120 mm cut.
STETON Combined Woodworking Machines
Combined planers AD 415 x 2 and AD 41/51 x 2 and five-function CH 300 x 5 and CH 400 x 5 machines.
STETON Spindle Moulders
Spindle moulders T-50 S, T-50 L and T-42 R series for profiling, tenoning and window production.
STETON Circular Saws
Sliding table saws SR 315/350, SR 400 M, SR 400 E and SR 400 RE with 3200 or 3800 mm carriages.
STETON PF 530 S Surface Planer
Heavy-duty surface planer with 530 mm working width, 2900 mm tables and a 7.5 HP motor as standard.
STETON Thickness Planers
Thickness planers in 530 and 630 mm widths, planing 5 to 300 mm parts with automatic table lift.
STETON SN H Band Saws
Enclosed H-type band saws in four sizes, SN 600 H to SN 900 H, with full flywheels and foot brake.
STETON DEDRA Moulding Machines
Straightening and moulding machines with 4 to 7 spindles, from the DEDRA 4 FH to the DEDRA PLUS 7-H.
STETON SM 310 T Multi-Rip Saw
Multi-rip saw with 300 mm saw group, 100 mm cut height and an extractable sleeve for blades and spacers.
STETON Wide Belt Sanders
Wide belt sanders with 1 to 3 belts from 650 to 1350 mm wide, plus the LN 300 stroke belt sander.
STETON FM Multiple Drilling Machines
Multiple drilling machines with 21 to 35 quick-coupling spindles per head, from single-head to three-head.
STETON R M Radial Saws
Radial saws with 400 mm blade and 125 mm depth of cut, in four arm lengths up to 1155 mm cutting width.
STETON Mortising Machines
Horizontal, chain and bit mortisers for joinery and doors, from the manual MBO T1 to the N.C. MBO T9.
STETON PT Overhead Copying Routers
Overhead copying routers with fixed or tilting head and 600, 800 or 900 mm spindle-to-column clearance.