Configurations
- NanoMixer (dual), NanoMixer-Triplex (triple) and NanoMixer-Quad (quadruple) versions.
- Channel configurations: A+B, A+B+C, A+B+C+D.
- Microfluidic chip options: Y-type, S-type, X-type.
Microfluidic Mixer
Genizer NanoMixer Microfluidic Mixers
NanoMixer / NanoMixer-Triplex / NanoMixer-Quad — up to 500 psi, 0–10 mL/min per pump, Y/S/X chips
Genizer NanoMixer Microfluidic Mixers from Genizer are benchtop systems (NanoMixer, NanoMixer-Triplex, NanoMixer-Quad) for preparing mRNA, DNA, siRNA, lipid and polycation nanoparticles at up to 500 psi.
Manufactured by
Genizer
Genizer NanoMixer Microfluidic Mixers
Review the confirmed product information, including description, features, benefits, and applications.
The NanoMixer Microfluidic Mixing System is an electrically driven benchtop platform for laboratory-scale formulation of nucleic-acid-based delivery systems, including mRNA, DNA, siRNA, lipid nanoparticles and polycation complexes. It operates at pressures up to 500 psi without compressed air or hydraulic oil.
Independent syringe pumps, a PLC-based programming control system and interchangeable microfluidic mixing chips (Y-type, S-type and X-type) give reproducible, uniform mixing. Configurations cover dual (NanoMixer), triple (NanoMixer-Triplex) and quadruple (NanoMixer-Quad) component blending for A+B, A+B+C or A+B+C+D formulations.
Flow rates are programmable from 0–10 mL/min per pump, with precise mixing ratio control and minimal dead volume. Optional heating/cooling jackets with temperature monitoring support formulation stability up to 80°C under sanitary, FDA- and GMP-compatible conditions.
Flow & Pressure
- Maximum operating pressure: 500 psi.
- Programmable flow rate: 0–10 mL/min per pump.
- Independent syringe pumps with PLC control.
- Precise inlet control with settable volume as low as 0.2 mL.
Temperature & Design
- Optional heating/cooling jacket with temperature sensor.
- Formulation stability up to 80°C with the optional jacket.
- Compact benchtop design.
- CE and RoHS compliant.
Reproducible Formulation
Highly reproducible nanoparticle formulation.
Precise Ratio Control
Precise control of mixing ratios and flow rates.
Minimal Dead Volume
Minimal dead volume for high-value materials.
Multi-Component Capability
Flexible formulation with two, three or four components.
Compact Footprint
Compact, laboratory-friendly footprint.
Nucleic Acid Ready
Suitable for sensitive nucleic-acid-based formulations.
The NanoMixer range is used for laboratory formulation of nucleic-acid and lipid-based nanoparticle systems.
mRNA, DNA and siRNA Delivery
Formulation of mRNA, DNA and siRNA delivery systems.
Lipid Nanoparticles and Liposomes
Lipid nanoparticles, liposomes, nanoemulsions and fat emulsions.
Suspensions and Microspheres
Nanoparticle suspensions, microspheres and cell disruption.
Multi-Component Development
Development of multi-component formulations.
CE Compliant
The system is CE compliant.
RoHS Compliant
The system is RoHS compliant.
Sanitary-Grade Materials
The system is built from sanitary-grade materials.
FDA & GMP Compatible
The system has an FDA & GMP compatible design.
Need support with this microfluidic mixer?
Share your formulation components, number of inlet streams, flow rates and batch volume, and our Pharma & FMCGs team will support you with the suitable product information.
Other Products in R&D Solutions
Explore other products available within the same product category and open each page for complete technical details.
Merck Cogent Lab TFF System
Modular lab-scale TFF system for concentration and diafiltration, with 500 mL, 2 L or 5 L tanks.
Genizer MixGenizer High Pressure Micromix Homogenizer
Multi-inlet micromix homogenizer up to 30,000 psi and 100 mL/min with ±0.1 mL inlet volume control.
Genizer NanoGenizer-Dual Homogenizer
Portable dual-pump lab homogenizer up to 30,000 psi, with 180 mL/min at 25,000 psi and 120 mL/min at 30,000 psi.
Genizer NanoGenizer-II High Pressure Homogenizer
Electric bench-top homogenizer up to 45,000 psi for lipid nanoparticles, 150 mL/min at 30,000 psi.
Genizer HandExtruder Liposome Extruder
Hand-driven 316L liposome extruder up to 700 psi with 19 mm membranes, typically giving 50–120 nm liposomes.
Genizer Jacketed Liposome Extruder
Jacketed membrane extruder that keeps lipids above transition temperature for uniform liposome size reduction.
Genizer Online High Pressure Liposome Extruder
Scalable 316L liposome extruder from 150 to 6,000 psi, covering 1 mL test scale up to 100 L production.
SPM TDP Single Punch Tablet Press
Compact single punch tablet press with adjustable fill depth, tablets up to 25mm (TDP-6).