Two C-frame mechanical presses with yellow slides standing side by side in an assembly hall
C-Frame Mechanical Press
BLISS-BRET PCK C-Frame Mechanical Presses
Single connecting rod C-frame presses from 630 to 3,200 kN
BLISS-BRET PCK presses are C-frame mechanical presses with a single connecting rod, from 630 to 3,200 kN. They suit cutting, punching, forging and deburring, and they fit well as rework presses on flat ground.
Manufactured byBLISS-BRET
630 kNSmallest standard force
3,200 kNLargest standard force
20–240 mmStroke, by model
35–120 /minStrokes per minute, by model
150 mmMotorised shut height adjustment
Overview
An open-front press for many jobs
The PCK range covers C-frame mechanical presses with a single connecting rod and standard capacities from 630 kN to 3,200 kN. The open C-frame gives access to the tool area for cutting, punching, forging, deburring and similar work.
The range is particularly suited to rework press applications. Stroke change is automated, the shut height adjustment is motorised and lubrication is centralised and controlled.
The compact structure is installed on flat ground with no pit, and each press can be customised on request with options such as shock-absorbing feet, SMED equipment or force measurement.
Applications
Typical PCK work
The official page lists these uses for the C-frame PCK range.
Front of a yellow press with a transparent sliding guard door in front of the tool area
Cutting and punching
Single-rod C-frame presses for cutting and punching sheet metal parts.
Forging and deburring
The range is also used for forging and deburring operations.
Rework presses
The PCK is particularly suited to rework press applications next to the main production line.
Features
Standard and optional equipment
- Single connecting rod, C-frame
- Automated stroke change, 20 to 240 mm depending on model
- 35 to 120 strokes per minute depending on model
- Hydraulic overload safety
- Motorised shut height adjustment up to 150 mm
- Automated, controlled centralised lubrication and remote maintenance
- Options: shock-absorbing feet, pre-stressed slide guide, force measurement
- SMED options (clamps, lifting rulers, loading arms), cushions and ejectors on request
Benefits
Why choose the PCK
Compact structure
Installation on flat ground, no pit required
Customisation on request
Open C-frame access to the tool area
Looking for a C-frame press for cutting or rework?
Share your parts, tools and required force, and our Machinery team will help you select the right BLISS-BRET PCK press.
Other Products in Mechanical & Hydraulic Presses
Explore other products available within the same product category and open each page for complete technical details.
BLISS-BRET 2PACK H-Frame Mechanical Presses
H-frame mechanical presses with two connecting rods, 1,600 to 8,000 kN, for stamping with large tools.
BLISS-BRET PG Knuckle-Joint Presses
Knuckle-joint presses up to 12,000 kN for hot forging, with less torque and lower energy use.
BLISS-BRET PM Die-Forging Presses
Monobloc eccentric die-forging presses with maximum force 12 mm above bottom dead centre.
BLISS-BRET PHS Single Acting Hydraulic Presses
Single-acting hydraulic presses, C- or H-frame, 500 to 25,000 kN, for punching, cutting and hardening.
BLISS-BRET PHD Double Acting Hydraulic Presses
Double-acting hydraulic presses, 500 to 25,000 kN, with cushion, ejector or blank holder for drawing.
BLISS-BRET PHT Triple Acting Hydraulic Presses
H-frame triple-acting hydraulic presses, 500 to 25,000 kN, for plunger stamping and complex parts.
BLISS-BRET PHR Hydraulic Straightening Presses
Hydraulic straightening presses, C- or H-frame, 3,500 to 30,000 kN, for plate, profiles, tubes and bars.