Complete Workflow
- Covers mixing, homogenization, sterilization and analysis.
- High-pressure homogenization for nano-scale droplet formation.
- Typical nanoemulsion droplet size: 20–200 nm.
Nanoemulsion System
Genizer Nanoemulsion System
Genizer Nanoemulsion Solution — 20–200 nm droplets, batch 25 mL–10 L, continuous 10 mL/min–20 L/hour
Genizer Nanoemulsion System from Genizer is an integrated nanoemulsion solution for batch and continuous manufacturing, combining homogenization, 0.22 μm sterile filtration and DLS droplet size analysis.
Manufactured by
Genizer
Genizer Nanoemulsion System
Review the confirmed product information, including description, features, benefits, and applications.
The Genizer Nanoemulsion Solution is a scalable system for the preparation, sterilization and characterization of nanoemulsions for pharmaceutical, biotech and formulation work. Nanoemulsions are colloidal dispersions of oil, surfactant and excipients with droplet sizes typically 20–200 nm; they are translucent and thermodynamically stable.
Preparation follows four steps: mixing emulsifier and oil, high-pressure homogenization to nano-scale droplets, sterilization by 0.22 μm filtration, and quality analysis with a particle sizer.
The solution supports batch preparation from 25 mL to 10 L and continuous manufacturing from 10 mL/min up to 20 L/hour. It integrates NanoGenizer high-pressure homogenizers, online stainless-steel sterile filtration systems and dual-light nanoparticle sizers based on dynamic light scattering (DLS).
Batch & Continuous Capacity
- Batch processing: 25 mL – 10 L.
- Continuous processing: 10 mL/min – 20 L/hour.
- Scalable configurations for lab, pilot and manufacturing use.
Filtration & Analysis
- Integrated stainless-steel inline sterile filtration (0.22 μm).
- Dynamic Light Scattering (DLS) nanoparticle size analysis.
Formulation Support
- Supports translucent nanoemulsion formulations.
- Compatible with co-emulsifiers, stabilizers, antioxidants, taste blockers and pH modifiers.
Higher Bioavailability
Increases the bioavailability of active ingredients.
Dose Reduction
Helps reduce dosage, response time and adverse effects.
Taste Masking
Improves taste masking for oil-based formulations.
Uniform Droplets
Gives a uniform, stable nano-scale droplet size distribution.
Lower Production Cost
Speeds processing and lowers overall production cost.
Scalable Sterile Output
Scales from laboratory to uninterrupted continuous sterile production.
The Genizer Nanoemulsion System is used to produce nanoemulsions across pharmaceutical, nutraceutical, cosmetic and industrial formulations.
Pharmaceutical Nanoemulsions
Nanoemulsions for pharmaceuticals and active ingredients with low bioavailability.
Food and Extract Oils
Food, nutraceutical, extract oil and lipid formulations.
Biotech and Cosmetics
Nanoemulsions for biotech products and cosmetics.
Inks and Paints
Nanoemulsions for inks, paints and formulation development.
GMP-Oriented Compatibility
System components compatible with GMP-oriented manufacturing.
Need support with this nanoemulsion system?
Share your formulation, target droplet size, batch volume or continuous flow rate and filtration needs and our Pharma & FMCGs team will support you with the suitable product information.
Other Products in Semi-Solid Workflow
Explore other products available within the same product category and open each page for complete technical details.
SPM ZJR Vacuum Emulsifying Mixer
Vacuum emulsifying mixer, 50 to 1000 L, for heating, melting, homogenizing and emulsifying creams and pastes.
SPM GF-60 Soft Tube Filling and Sealing Machine
Soft tube filling and sealing at up to 60 pcs/min, 5-250ml per tube, filling error ≤±1%.
SPM ZS-3L Suppository Filling and Sealing Line
Fully automatic suppository filling and sealing, 4,000-5,000 pcs/h, dosage ＜±2%, PVC/PE film.
Genizer ProdGenizer Dual Pump Homogenizer
Dual-pump production nano-homogenizer up to ~30,000 psi, CIP/SIP compatible and designed for 24/7 operation.
Genizer PilotGenizer Pilot Dual Pump Homogenizer
Pilot-scale dual-pump nano-homogenizer up to ~30,000 psi with CIP/SIP compatible design for scale-up work.
Genizer ManuGenizer Homogenizer
Dual or quad pump homogenizer up to 45,000 psi, with flow up to 480 L/hr at 30,000 psi (water).
Genizer NanoGenizer-Quad Homogenizer
Lab quad-pump homogenizer up to 30,000 psi with 6–27 L/hr flow and a Y-type diamond interaction chamber.
Genizer NanoGenizer NG-Ti Series Homogenizer
Portable lab homogenizer up to 45,000 psi, with up to 150 mL/min at 30,000 psi and ±0.1 mL inlet control.
Genizer WILL Series Microjet Homogenization System
Microjet homogenization system up to 30,000 psi with 60 to 500 L/h models and Y/Z-type diamond chambers.
Genizer Mixing Diamond Interaction Chamber
Multi-inlet diamond chamber for mixing fluid streams at up to 30,000 psi, compatible with MixGenizer systems.
Genizer UHP-DIXC Diamond Interaction Chamber
Ultra-high-pressure diamond chamber, single or multi-slotted, rated up to 80,000 psi (configuration dependent).
Genizer Y-Type Diamond Interaction Chamber
Y-type diamond chamber for high-pressure homogenizers up to 45,000 psi, single or multi-slotted.
Genizer Z-Type Diamond Interaction Chamber
Z-type diamond chamber with 20,000 to 45,000 psi options, single or multi-slotted, in diamond and 316L steel.