Manual Wet Blasting

ITF PP-UM Manual Wet Blasting Machine

Manual wet blasting with a mixture of shot, air and water

ITF PP-UM manual wet blasting machines handle a homogeneous mixture of shot, air and water for a softer treatment than dry blasting, with a heavy-duty pump and compressed air at 6–8 bar.

Manufactured byITF

ITF PP-UM manual wet blasting cabinet in light grey with glove ports, foot pedals and a side roller stand — ITF PP-UM Manual Wet Blasting Machine from ITF.

30% / 70%Common shot to water mixture

6–8 barCompressed air for shot impact

Heavy-dutyPump for aggressive liquids

ManualOperator-guided process

Overview

A softer blast, guided by hand

The PP-UM machines are manual wet blasting machines designed to handle a homogeneous mixture of shot, air and water.

Wet blasting gives a softer treatment of the surface than dry blasting. The common mixture is 30% shot and 70% water, with corundum, silicates or glass beads as the usual media. A special heavy-duty pump, designed for aggressive liquids, keeps the solution homogeneous and delivers the mixture to the blasting gun, while compressed air at 6–8 bar gives the correct shot impact on the surface.

Applications

Where the PP-UM is used

The PP-UM suits manual work where a softer wet-blasted finish is needed.

Pipe on a roller support stand entering the side port of a wet blasting cabinet

Pipe on a roller support stand entering the side port of a wet blasting cabinet

Gloved hands on the perforated turntable inside the wet blasting cabinet

Soft surface finishing

Wet blasting for a softer treatment of the surface than dry blasting.

Stainless steel wet blasting chamber with turntable, blasting gun and glove

Manual blasting work

The operator guides the process through the glove ports of the cabinet.

Blue and stainless wet blasting cabinet with a white loading trolley in a workshop

Glass bead and corundum media

Wet blasting with corundum, silicates or glass beads.

CorundumSilicatesGlass beadsWet peening

Features

Machine features

Homogeneous mixture of shot, air and water
Common mixture of 30% shot and 70% water
Heavy-duty pump designed for aggressive liquids
Pump keeps the solution homogeneous and feeds the blasting gun
Compressed air at 6–8 bar for the correct shot impact

Benefits

What it brings to production

Softer surface treatment than dry blasting

Even result from a homogeneous solution

Works with common media such as corundum, silicates and glass beads

Need a manual wet blasting cabinet?

Tell us about your parts and the finish you need, and our Machinery team will help you select the right ITF PP-UM machine.

Surface Treatment & Finishing

Other Products in Wet Blasting Machines

Explore other products available within the same product category and open each page for complete technical details.

Rösler ABR wet blast room with large orange double door, grey walls, access stairs and process water unit below

Wet Blasting Machines

Rösler ABR Pure Finish-Systems

Wet blast room for particularly large parts, reaching a reproducible roughness below Ra 0.8 µm on stainless steel.

Rösler VB H wet blast cabinet with viewing window, two glove ports, orange side door and control box

Wet Blasting Machines

Rösler VB H-Systems

Stainless steel wet blast cabinet with homogeneous media and water mixing for constant surface quality.

Rösler ALS UHPW water jet system with open L-shaped door, orange robot arm and rotary fixture inside the cabin

Wet Blasting Machines

Rösler ALS UHPW-Systems

Ultra-high pressure water jet system that removes even the hardest coatings at up to 4,000 bar, robot-controlled.

ITF PP-UA wet blasting machine in stainless steel with gantry on top and a loading conveyor at the side

Wet Blasting Machines PP-UA

ITF PP-UA Automatic Rotating Table Wet Blasting Machine

Automatic wet blasting with shot, air and water on a motorized table with a 2-axis gantry robot.