Blue crane column with yellow operator cabin and red access platforms
Shipyard Crane
RIKON RSC-630 Shipyard Crane
Electric double jib mounting crane for shipbuilding and assembly
The RIKON RSC-630 is a double jib mounting crane for shipyards. It handles section mounting, assembly work and single heavy lifts, with electric drives for luffing, hoisting, slewing and travel and a micromotion system.
Manufactured byRIKON
35 tMain hoist capacity, standard
Up to 500 tMain hoist capacity, option
45 mMain hoist max reach (100 m option)
50 mLifting height (100 m option)
A6Operation mode to ISO 4301/1
Overview
A mounting crane for hull sections and outfitting
The RSC-630 is built for shipbuilding companies and shipyards doing completion and assembly work. Its double jib system gives precise handling, and a micromotion system supports complex installation lifts.
The main hoist reaches 9 to 45 m and lifts 35 t at 9 to 18 m, falling to 8 t at 45 m. The auxiliary hoist reaches 11 to 48 m with 6 t. As options, the main hoist can be raised to 500 t, the auxiliary hoist to 50 t, the boom to 100 m and the lifting height to 100 m.
Lifting height is 50 m and lowering depth 17 m for both hoists. The crane weighs 350 t on a 10.5 m gauge and 13 m wheelbase, with a maximum wheel load of 35 t and a 7.5 m tail radius.
Applications
Work on the shipyard
The RSC-630 covers the heavy lifts of hull assembly and outfitting.
Red spiral access stairs on a crane column with a coastal town behind
Worker in high-visibility clothing climbing red access stairs on a blue crane
Section mounting
Hull sections are lifted and set in place during ship assembly.
Assembly work
Two hoists handle main loads and smaller parts during completion work.
Single heavy lifts
With the capacity option, the main hoist lifts single unit loads of up to 500 t.
Features
Crane features
- Double jib system with electric luffing, hoisting, slewing and travel
- Micromotion system for installation work
- Main hoist plus auxiliary hoist of 6 t (50 t option)
- Main hoist speed 10 m/min, auxiliary hoist 40 m/min
- Slewing 0.5 rpm, luffing 40 m/min, travel 30 m/min
- 10.5 m gauge and 13 m wheelbase
Benefits
What it brings to the shipyard
Precise placing of large sections with micromotion control
Two hoists for heavy and light lifts on one crane
Options for capacity, reach and height as the yard grows
Electric drives with lower environmental impact
Lifting hull sections on your slipway?
Share your section weights, reach and lifting heights, and our Machinery team will help you specify the RIKON RSC-630 mounting crane.
Other Products in Port & Shipyard Cranes
Explore other products available within the same product category and open each page for complete technical details.
RIKON RPS Portal Cranes
Fully electric double jib level luffing cranes for bulk, general cargo and containers, in three sizes.
RIKON RMG / A-RMG Rail Mounted Gantry Cranes
Rail mounted gantry container cranes, 43 t under spreader and 50 t under pulley frame, manual or automated.
RIKON RTG / A-RTG Rubber Tired Gantry Cranes
Rubber tired gantry container cranes, 41 to 65 t, stacking 1 over 7, with diesel, hybrid or electric power.
RIKON RMH Mobile Harbour Crane
Fully electric mobile harbour crane with no hydraulics, up to 124 t by hook and 48 m reach.
RIKON N-SERIES Ship and Offshore Cranes
Electro-hydraulic ship and offshore cranes with corrosion-resistant build and an Arctic version to -60°C.