Modular monitoring of up to eight water quality parameters
MetriNet from Badger Meter (ATi) is a low-power, modular water quality monitoring system. Choose up to eight parameters from 16 M-Node smart sensors and collect data from street-level or below-ground sites.
MetriNet is a low-power, modular platform for measuring water quality and collecting data at remote locations. At its heart are M-Node smart sensors – complete digital sensors and transmitters in a small body – that plug into a common bus and can be added or removed without affecting the other measurements.
Users select up to eight parameters from 16 options, including free, total and combined chlorine, chlorine dioxide, pH, ORP, conductivity, dissolved oxygen, dissolved ozone, turbidity, fluoride, nitrite, peracetic acid, hydrogen peroxide and pressure. Systems are available for street-level and below-ground installation.
Placed at critical points in a distribution network, MetriNet monitors give near real-time information on disinfection, discoloration, taste and odour events, bursts or leaks, so operators can act before problems spread.
Key Features
Why choose MetriNet Multi-Parameter Monitor
Smart M-Node sensors
Each node is a complete digital sensor and transmitter in a miniaturised body.
Choose your parameters
Select up to eight parameters from 16 options per system.
Built to site needs
Panel, bollard and bespoke configurations; street-level and submersible options.
Low power
Designed for remote locations without mains power.
Calibrate anywhere
Calibration data is stored in each sensor, so sensors can be calibrated in the lab and swapped in the field.
Sensor Ranges
Available M-Node sensors
Free chlorine
0…5.00 ppm (0.01 ppm)
Total chlorine
0…5.00 ppm (0.01 ppm)
Combined chlorine
0…5.00 ppm (0.01 ppm)
Chlorine dioxide
0…5.00 ppm (0.01 ppm)
pH
2…12 pH (0.01 pH)
ORP
0…1000 mV (1 mV)
Conductivity
0…2000 µS (1 µS); 4E 0…2000 mS
Dissolved oxygen
0…20.00 ppm (0.01 ppm)
Dissolved ozone
0…2.000 ppm (0.001 ppm)
Turbidity
0…40.00 NTU (0.01 NTU)
Fluoride
0.1…10.00 ppm (0.01 ppm)
Nitrite (NO2)
0…2.000 ppm (0.001 ppm)
Peracetic acid
0…200 ppm (1 ppm)
Hydrogen peroxide
0…20.00 ppm (0.01 ppm)
Pressure
0…300 psig (1 psig)
Order Information
MetriNet Multi-Parameter Monitor items and order numbers
Q51 Mobile M-Node Calibrator
Order no. 00-1798
Battery-powered unit to program and calibrate M-Node sensors anywhere; 4 GB data logging, connects up to 16 sensor types.
Item names and order numbers as published by Badger Meter.
In Detail
MetriNet Multi-Parameter Monitor in detail
MetriNet with 4 M-Node sensors (HVAC)MetriNet with 6 M-Node sensors (HVAC)
