Name: CISAM-ERNST e-dynatest Portable Wireless Hardness Tester
Brand: CISAM-ERNST

Heavy-load Rockwell testing on-site

The e-dynatest is a portable heavy-load Rockwell hardness tester for testing large parts on-site without moving them to the laboratory. Its 100 kgf / 980 N test load gives results close to bench-top testing, suits parts with poor surface condition and is especially useful for cast iron.

It measures in every direction and is not affected by bending or deflection of the workpiece. Results appear on a 6-inch touchscreen tablet with wireless data sharing up to 100 m, and the Android application handles storage, scale conversion, statistics, histograms, reports, notes, barcode scanning and GPS localization.

Where the e-dynatest is used

e-dynatest on a large shaft with tablet showing 355 HB30

Large and heavy parts

On-site testing of parts that cannot be moved to a laboratory.

e-dynatest seen from above on a cast block next to tablet with map view

Cast iron

High test load for parts with poor surface condition.

e-dynatest standing on a large gear with tablet beside it

Large metal components

Rockwell and Brinell scale testing of large components.

e-dynatest held on a steel structure with tablet showing 147 HB30

Workshop testing

Testing in workshops with results shown on the tablet.

On-site hardness testingOutdoor hardness testingProduction quality controlHeat treatment verificationMaintenance inspectionIncoming and outgoing inspectionHeavy industry inspectionFoundry applicationsField service testing

100 kgf portable testing

Testing

Test load 100 kgf / 980 N, preload 3.45 kgf / 33.8 N.
One manual pressure performs one test.
Measures in every direction.
Min. diameter 25 mm without and 12 mm with surface preparation.

Tablet and wireless

6-inch IP67 touchscreen tablet with 2.0 MP and 5.0 MP cameras.
16 GB flash memory, 2 GB RAM and micro SD slot.
Wireless rechargeable probe, data sharing up to 100 m.
WiFi, Bluetooth and micro USB.

Scales

Standard: HRC 10–70, 1HB30 60–700, 2HB30 100–500.
DPTH depth scale 0–300 micron.
Optional: N/mm², kg/mm², HB5, HB10, HV, HRB for aluminium, steel and brass.
Optional S-HB5 with special 2.5 mm ball indenter.

Technical data

Mechanical unit approx. 2050 g, electronics approx. 360 g.
Battery approx. 7 hours, approx. 20 hours standby, fast recharging.
Power supply 100–240 V; shock-proof plastic case included.

Why use the e-dynatest

Bench-like results. High test load gives results comparable to a bench-top tester.

Less preparation. Needs less surface preparation than lower-load portable testers.

Lower handling costs. Reduces handling, cutting and transportation of large parts.

Consistent results. Readings hold even when the workpiece bends or deflects.

Digital reporting. Statistics, photos, barcodes and GPS location in the reports.

Certified results. ACCREDIA certification option where certified results are required.