Monitoring for oil in water contamination
Online Water Analyzer
MS1210-S Oil in Water Analyzer (Medium Range)
Online Water Analyzer from Multisensor Systems
MS1210-S online oil in water analyzer for industrial monitoring of hydrocarbons and VOCs in cooling water, stormwater drains, and effluent. Detect 0.1-40 ppm levels for environmental compliance.
Manufactured byMultisensor Systems
Multisensor Systems ↗
Overview
About MS1210-S Oil in Water Analyzer (Medium Range)
Overview The MS1210-S is an industrial oil in water analyzer designed to monitor the outflows from industrial facilities, water in cooling systems and to detect fuels and other VOCs in drains and waste water networks. The presence of pollutants such as BTEX, trichloroethylene (TCE), tetrachloroethylene (PCE or Perc), vinyl chloride, 1,2-dichloroethane, 1,1,1-trichloroethane, 1,1-dichloroethylene, styrene can lead to heavy fines and process contamination. The instrument works by sensing gases or volatiles to provide a non-contact measurement system with very low maintenance requirements.
Discharge of VOCs into wastewater is an endemic problem in engineering, chemical processing, food and beverage production and other industrial processes.
For this reason, some industrial facilities have purification plants to remove the bulk of these contaminants from the water before it is discharged, but even these suffer from failures and can be over run.
Key Features
Why choose MS1210-S Oil in Water Analyzer (Medium Range)
Detect VOC contamination in industrial wastewater
Monitor drain and stormwater systems for flammable liquids
Surface water systems for fuel pollution
Offer a monitoring solution for air, land remediation and industrial applications
Detect VOC breakthrough in carbon beds
Technical Data
MS1210-S Oil in Water Analyzer (Medium Range) technical data
- Minimum
- Maximum
- Measurement Frequency
- Continuous
- Analog Output Isolation
- 5 kVAC, 400 VDC
- System Weight
- 30 kg / 66 lbs
- Sampling Tank
- 316 Stainless Steel
- Flow Limit Switch
- Option available on request
- Water Flow Rate
- 2 l/min / 0.52 The manufacturer gpm
- System Dimensions
- 650 x 960 x 400 mm 25.59 x 37.80 x 15.75 inches |
- Supply Voltage
- 90 V AC 9 VDC | 240 V AC 36 VDC | 50 Hz or 60 Hz
- Power Consumption
- 45 W | Typical 20 W during operation
- Consumables
- 6 Months: Filter and restrictor
Works With
Related products
Online Water Analyzer
MS1200-S Oil in Water Analyzer
MS1200-S online oil in water analyzer for continuous monitoring of hydrocarbons, BTEX, and VOCs in water.
Online Water Analyzer
MS1220-S Oil in Water Analyzer (High Range)
MS1220-S high range oil in water analyzer for petrochemical and industrial monitoring of hydrocarbons and VOCs.
Online Water Analyzer
MS2000-S Total THM Analyzer
MS2000-S online Total Trihalomethane analyzer for drinking water treatment plants.
Need a quotation or technical advice on MS1210-S Oil in Water Analyzer (Medium Range)?
Our Biotechnology team in Egypt will help you choose the right configuration and accessories for your application.
Other Products in Single-Parameter Online Analyzers
Explore other products available within the same product category and open each page for complete technical details.
MS1200-S Oil in Water Analyzer
MS1200-S online oil in water analyzer for continuous monitoring of hydrocarbons, BTEX, and VOCs in water.
MS1220-S Oil in Water Analyzer (High Range)
MS1220-S high range oil in water analyzer for petrochemical and industrial monitoring of hydrocarbons and VOCs.
MS2000-S Total THM Analyzer
MS2000-S online Total Trihalomethane analyzer for drinking water treatment plants.
MS4000-S VOC in Gas Analyzer
MS4000-S online VOC gas analyzer for industrial monitoring of drains, effluents, and process gases.