Continuous water removal
Condensate removed and drained.
Gas Sample Conditioning System
C21 Dri-Gas Sampling System
Dehumidified gas samples from humid vents and wet wells
The C21 Dri-Gas system from Badger Meter (GasSens / ATi) draws gas samples from high-humidity locations and removes water vapour on a cold plate before the gas reaches toxic or combustible gas sensors.
Manufactured byBadger Meter
Overview
About C21 Dri-Gas Sampling System
Condensation on sensor surfaces or in flame arrestors often causes early sensor failure in humid locations. The C21 draws samples from vent stacks, ducts, wet wells and similar points and dries them by contact with a cold plate.
Excess condensate is pumped to a drain fitting at the bottom of the enclosure. The dried sample suits toxic and combustible gas monitoring equipment.
Key Features
Why choose C21 Dri-Gas Sampling System
Vacuum sampling
Samples ducts under vacuum.
No sensor blinding
Dry sample protects sensors.
Low maintenance
Simple, serviceable design.
Technical Data
Main specifications
- Power
- 120 V AC, 230 V AC optional, 35 VA
- Flow rate
- 300–800 cc/min, 500 recommended
- Pump
- brushless diaphragm, 10,000 h
- Connections
- push-to-connect for 1/4 in. OD tubing
- Alarm
- low-flow lamp and SPDT relay
- Operating temperature
- 2…45 °C
- Size
- 381 × 432 × 229 mm
- Weight
- 8.2 kg
Applications
Where C21 Dri-Gas Sampling System is used
Wet wells and lift stations
Humid vent stacks
Odour-control ducts
Works With
Related products
Gas Sampling Pump System
A21 Gas Sampler
Diaphragm pump sampler, 300–1000 cc/min, loss-of-flow alarm, NEMA 4X enclosure.
Explosion-Proof Gas Detector
D12 Toxic & Combustible Gas Detector
Explosion-proof detector for up to 46 toxic and combustible sensors; loop, HART, relays or Modbus.
Need a quotation or technical advice on C21 Dri-Gas Sampling System?
Our Biotechnology team in Egypt will help you choose the right configuration, sensors and accessories for your site.
Other Products in Gas Detection Spares & Accessories
Explore other products available within the same product category and open each page for complete technical details.
A21 Gas Sampler
Diaphragm pump sampler, 300–1000 cc/min, loss-of-flow alarm, NEMA 4X enclosure.
B14 Gas Alarm Receivers
DIN-rail modules with LED display, 3 alarm relays and trouble relay; 1 to 12 modules per enclosure.
GasSens Midi Controller
Up to 64 addressable sensors per unit, 3 alarm levels, relays, Modbus and data logging.
A23-14 Ozone Generator
Portable UV generator, about 0.8 ppm ozone at 500 cc/min, individually calibrated.