Name: Titan 2 Fixed Benzene Monitor
Brand: ION Science

About Titan 2 Fixed Benzene Monitor

Titan 2 benzene gas monitor incorporates the NEW MiniPID T2 10.0 eV Sensor which offers improved sensitivity, dependability and overall performance. The unique sampling method eliminates interfering gases such as toluene, xylene and methane providing you with accurate benzene concentration readings you can rely on.

Titan 2 offers a world major solution for the detection of benzene, providing precise detection at levels as low as 0.02 ppm (20 ppb) and as high as 20 ppm within 60 seconds. Titan 2 benzene gas monitor has been specifically engineered to analyse airborne dangers and can be utilised to evaluate the efficiency of purification or vapour recovery systems/units (VRU).

Titan 2 benzene gas monitor has obtained certification for use in ATEX zoned environments and locations. Furthermore, the enclosure is IP65 rated, offering dependable protection against the intrusion of dust and water.

Why choose Titan 2 Fixed Benzene Monitor

New MiniPID T2 10.0 eV Sensor – Unique to Titan 2.

Low Detection Limit – Can detect benzene down to 0.02 ppm (20 ppb).

IP65 – Protection against a range of atmospheric conditions.

4-20 mA & RS485 Communication Options – Connect to your own control system.

Accessory Kit (9 Way Connector, 5 Way Connector, 2 mm Allen Key, 2.5 mm Allen Key, 3 mm Allen Key, Actuation Magnet)

Documentation (Safety Notice, Responsibility of Correct Use, Calibration Certificate)

Titan 2 Fixed Benzene Monitor technical data

Sensor Type: MiniPID T2 10.0 eV Sensor
Sensitivity: Benzene specific within typical petrochemical matrix
Detectable Range: 0.02 ppm – 20 ppm
Measuring Frequency: One Minute
Lower Level of Detection: 0.02 ppm (20 ppb) (10 ppb resolution)
Accuracy: +/- 50 ppb or +/- 10%, whichever is greater*
Temperature Stability: Internally heated
Flow Rate: Sample flow rate ≥ 100 ml/min
Display: Graphic BW LCD 64 x 128 pixels with backlight Bright LEDs for normal operation, fault and alarm Two magnetic switches for menu operation
Operating Temperature: Recommended operating range of -20 oC to +50 oC (-4 oF to +122 oF) for optimum performance**
Approvals: 4FTZU 14 ATEX 0172X Ex II 2G Ex db IIB+H2 T4 Gb Tamb. = -20 oC to +55 oC IECEx FTZU 14.0030X Ex db IIB+H2 T4 Gb Tamb. = -20 oC to +55 oC QPS LR1621-1 Ex db IIB+H2 T4 Gb AEx db IIB+H2 T4 Gb Ta= -20 oC to +55 oC
Ingress Protection Rating: IP65
Humidity: 0 – 99 % RH
Minimum Service Period: 6 months – PID lamp, electrode stack, inline filter, VRV restrictor, Hydrophobic & carbon filter replacement
Cable Entry: Two ¾ NPT gland threads
Power Requirements: Vin (nom) 24 V DC @ 3.2 A (recommended) Vin (max) 32 V DC @ 2.4 A Vin (min) 19 V DC @ 4.0 A
Communication: Isolated 4-20 mA output
Data Storage: On board MMC, minimum of six months (2GB)
Relay Output: Two isolated outputs, voltage free, 24 v DC @ 1.25 A
Weight and Dimensions: 15 kg (33 lbs) 219 x 219 x 172 mm (8.6 x 8.6 x 6.8” approx.)
Gas Sample Line: 10 m max length, PTFE, 6 mm OD, 4 mm ID *± 10 ppb for readings ≤ 0.1 ppm **+55 oC = ± 20% accuracy

Falco 2 Fixed VOC Gas Detector

The Falco Diffused is a fixed voc gas detector that eliminates false readings found with other competing technology, for the detection of toxic gases.

Fixed Gas Detector

Falco 2 11.7 eV Fixed VOC Detector

For the detection of high ionisation energy compounds, FALCO 2 11.7 eV is an imperative tool for workplace safety.

Fixed Gas Detector

The GasClam 2 continuous ground gas detector is a unique in-borehole gas monitoring system developed for the unattended collection of long-term gas…

View Product

Titan 2 Fixed Benzene Monitor

Fixed Gas Detector from ION Science

About Titan 2 Fixed Benzene Monitor

Why choose Titan 2 Fixed Benzene Monitor